Rent TVLogic 24″ LVM-241S director's monitor
24 - inch TVLogic 24″ LVM-241S field monitor High-End WUXGA from TVLogic Supports video resolutions up to 1920 x 1200. It has a brightness of 400 cd/m 2 , 1500:1 contrast ratio and supports 178° viewing angles. 3G-SDI, HDMI, DVI, SDI and audio ports for connectivity. TVLogic 24″ LVM-241S supports Ethernet management. A power cable and desktop stand are included with the monitor.
- The audio level meter displays the level of the built-in audio signal along with the video signal from a connector such as SDI or HDMI.
- Subtitles
- Blue/Mono Only" function to adjust the color tones (tones and saturation) of the screen using the SMPTE color scale.
- The focus assist assigns color to pixels on the borders of the image to inform the user when the best focus has been achieved.
- The H/V delay allows you to check the blanking area and synchronize signals by displaying horizontal and vertical intervals in the center of the screen.
- The key lock locks the handle or key control
- The marker displays different aspect ratios on the screen.
- Range Error analyzes the brightness and chromaticity information of the input signal; if the input signal exceeds the assigned minimum value and maximum value, the pixel flashes
- The time code information is displayed on the screen
- The custom aspect adjusts the width to height ratio of the display.
- Overscan feature for additional area around the four edges of the image that may not be seen reliably by the viewer
- The Underscan feature limits the size of the image, so the monitor displays everything the camera sees.
- The 1:1 pixel function displays the original resolution of the image without scaling to match a specific resolution or aspect ratio.
- The Y waveform displays the YCbCr luminance component of the input signal in a waveform.
- Vectorscope displays the "BY" and "RY" color components of the input signals on the XY axis.
- The camera LUT applies a LUT to the outgoing log signal
- The 1:1 pixel mapping modes for SD/HD display the original resolution of the image without scaling to match a specific resolution or aspect ratio.
- Supports A/B level 3G-SDI input
- The UMD displays eight user-configurable characters, the source ID or the auxiliary data control (ANC) signal on the screen.
- PbP (Picture-by-Picture) supports simultaneous display of multiple inputs on the screen.
- The HDR emulation feature allows users to test how an HDR image will look on location.
- Custom 3D LUT import allows you to load 3D-LUT files into non-linear editing software such as Davinci Resolve via USB flash memory and display your LUT on the VFM-055A or F-7H.